BCT-10

description

• The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

features

• Quick installation by hand
• Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
• Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
• Each unit is serialized, supplied with a test certificate and manual.
• Ideal rigging devices for lifting, pulling or suspending loads.
• Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
• Low-headroom design adjusts to fit a wide range of flat or tapered beams
• The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.