- Pail Container Type
- Gold Color
- Slight Petroleum Odor
description
- Tapmatic #1 Gold Cutting Fluid is great for all metals, including aluminum.
applications
- Boring | Broaching | Drawing | Drilling | Engraving | Reaming | Threading | Turning | Sawing | Facing | Milling
features
- Does not contain water, solvents, or inactive fillers
- Reduces cutting torque and improves cutting efficiency
- Does not contain chlorinated solvents or chlorinated paraffins
- Requires less product usage than traditional cutting fluids
- Increases tool life and improves surface finish
- Great for all metals including aluminum
- Excellent for tapping applications
Specific Gravity | 0.88 - 0.9 at 68 °F |
Flammability | Aerosol: Flammable Aerosol |
Vapor Density | Greater Than 1 (Air = 1) |
Color | Gold |
Odor | Slight Petroleum Odor |
Vapor Pressure | Less Than 0.05 mmHg @ 68 °F |
Viscosity | Less than 20 mm2/s |
VOC Content | 0 % Per US State and Federal Consumer Product Regulations |
Partition Coefficient | Less Than 1 |
Evaporation Rate | Less Than 0.1 BuAc |
Shelf Life | 10 Years |
Percent Volatile | Aerosol: Gas, Bulk: Liquid |
Physical State | Aerosol: Gas, Bulk: Liquid |
Container Type | Pail |
Container Size | 5 gal |
Density | > 1 (Air = 1) |
Series | #1 Gold |
Boiling Point | 465.8 °F |
Propellant | Aerosol: Carbon Dioxide |
Flash Point | 300.2 °F Cleveland Open Cup |
Net Fill | 5 gal, 18.93 L |
Water Solubility | Not Soluble |
Weight | 43.0 LB |
EAN or UPC | 78827403403 |