RC-162110-FS

Single Row Steel Needle Roller Bearing

Item #101742861

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Overall Width	0.63 in, 15.88 mm
Housing Bore [Max]	1.313 in
Relubricatable	No
Shaft Dia. [Min]	0.9995 in
No. of Rows	Single
Operating Temperature [Max]	230 ˚F
Series	RC
Bearing Material	1014 Steel
Shaft Dia. [Max]	1 in
Clamp Torque	412 lbf
I.D.	1 in, 25.41 mm
Radial Internal Clearance Specification	N/A
Self Aligning	No
Oil Hole	w/o Oil Hole
Mounting Method	Press Fit
Component	Assembly
Operating Temperature [Min]	-22 ˚F
Rolling Element	Roller
Tolerance	Iso Class 0 (RBEC 1)
O.D. Type	Straight
Cage Type	Window
O.D.	1.31 in, 33.35 mm
Bore Type	Round
Cage Material	Polymer
Housing Shoulder Diameter	1.9 in
Relubrication Feature	No
Radial Internal Clearance	N/A
Capacity	Standard Capacity
Speed (Max) Oil	8700 rpm
Lubricant	Rust Preventative
Precision Class	ABEC 1
Precision Ground	Yes
Outer Ring Width	0.63 in, 15.88 mm
Bearing Design	Roller Clutch
End Type	Open End
Enclosure	Open
Housing Bore [Min]	1.312 in
Origin	Roller Clutches
Weight	0.007 LB
EAN or UPC	605790193101