Skip to content Skip to navigation menu
YCRS Series Double Shielded Round Yoke Roller

YCRS-12

YCRS Series Double Shielded Round Yoke Roller
Item #101714910
  • YCRS Series Double Shielded Round Yoke Roller, 0.250 in ID x 0.750 in Cylindrical OD, 1/2 in Roller Width, Full Compliment Needle Rollers, Double Sealed, Steel, With Inner Ring
YCRS Series Double Shielded Round Yoke Roller
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • YCRS Series Double Shielded Round Yoke Roller, 0.250 in ID x 0.750 in Cylindrical OD, 1/2 in Roller Width, Full Compliment Needle Rollers, Double Sealed, Steel, With Inner Ring

features

  • Best used for high radial loads and where the bearing rolling motion occurs on the outer diameter surface
  • Made from premium high carbon, high chromium steel
  • Uses a full complement of greased rollers that offer maximum radial load capacity
  • Available with a crowned outside diameter (YCRSC inch series) and seals (YCRS inch series) for the inch product
  • Available with a standard crowned outside diameter (without the .DZ), shields ("ZZ" for STO, RSTO and NUTR series) or seals (.2RS for NA2200 series) for the metric product
  • RSTO metric series requires a hardened and machined shaft/stud, no inner ring included
Rolling Element Needle Roller
Bore Type Round
Material Steel
Series YCRS
Limiting Speed 3900 rpm
Inside Diameter Tolerance [Max] 0.2502 in
Shaft Diameter - Slip Fit [Max] 0.2497 in
Dynamic Capacity 2250 lbf
Shaft Diameter - Slip Fit [Min] 0.2493 in
Precision Class P0
O.D. Type Straight
Inner Ring With Inner Ring
Overall Width 0.5625 in
Operating Temperature [Max] 230 ˚F
Working Load 2000 lbf
Inch/Metric Inch
Operating Temperature [Min] -22 ˚F
No. of Rows Single
Inner Ring Width 0.56 in, 14.29 mm
Enclosure Double Sealed
Roller Width 1/2 in
Relubricatable No
Self Aligning No
Roller Dia. 0.750 in
Component Assembly
Relubrication Feature No
Shaft Diameter - Press Fit [Min] 0.2501 in
O.D. 0.75 in, 19.05 mm
Lubricant Grease
Overall Width Tolerance [Min] 0.5525 in
Overall Width Tolerance [Max] 0.5675 in
Roller Type Cylindrical
I.D. 0.250 in
Bearing Type Full Compliment Needle Rollers
Outer Ring Width 0.5 in, 12.7 mm
Inside Diameter Tolerance [Min] 0.2496 in
Clamping Dia. 1/2 in
Shaft Diameter - Press Fit [Max] 0.2505 in
Speed (Max) Grease 3900 rpm
Weight 0.08 LB
EAN or UPC 605790210402
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison