Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 36 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 1/5 in |
| Bushing Bore Size [Max] | 1.188 in |
| Bore Size [Max] | 1.188 in |
| Bore Size [Min] | 0.313 in |
| Pitch Diameter | 2.292 in |
| Bushing Series | N/A |
| Material External Use | Steel |
| Belt Width | 0.375 in |
| Pitch Dia. | 2.292 in |
| Length Through Bore | 1 in |
| Bore Range [Max] | 1.187 in |
| Bore Type | Rough Bore |
| Material Internal Use | Atomized Metals |
| Bushing Bore Size [Min] | 0.313 in |
| Bushing Type | None |
| Hub Type | B |
| Finished Bore | N/A |
| Hub Dia. | 1 1/2 in |
| Teeth Face Width | 0.563 in |
| Construction Internal | Solid |
| No. of Teeth | 36 |
| Hub Projection | 0.218 in |
| Material | Steel |
| Outside Dia. | 2.272 in |
| Set Screw Size | 10-24 x 3/16 |
| No. of Screws | 2 |
| Bore Range [Min] | 0.312 in |
| Type | D-1 |
| Belt Size | XL |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 0.7 LB |
| EAN or UPC | 697950114651 |
