Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 40 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | SK |
| Flange O.D. | 6.595 in |
| Belt Size | H |
| Bore Size [Min] | 0.5 in |
| Belt Width | 2 in |
| Hub Type | A |
| Length Through Bore | 2.344 in |
| Material | Cast Iron |
| Bore Range [Max] | 2.625 in |
| Bushing Type | QD |
| Outside Dia. | 6.314 in |
| Material Internal Use | Cast Iron |
| Type | HF-1 |
| Bushing Bore Size [Max] | 2.625 in |
| Bushing Bore Size [Min] | 0.5 in |
| No. of Teeth | 40 |
| Pitch Dia. | 6.366 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Size [Max] | 2.625 in |
| Belt Pitch | 1/2 in |
| Construction Internal | Solid |
| Material External Use | Cast Iron |
| Pitch Diameter | 6.366 in |
| Bore Range [Min] | 0.5 in |
| Teeth Face Width | 2.344 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Weight | 10.2 LB |
| EAN or UPC | 697950152165 |
