Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 48 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Dia. | 3.056 in |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Bore Size [Max] | 1.188 in |
| No. of Teeth | 48 |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Finished Bore | N/A |
| Belt Size | XL |
| Bore Range [Min] | 0.312 in |
| No. of Screws | 2 |
| Bushing Bore Size [Min] | 0.313 in |
| Teeth Face Width | 0.563 in |
| Hub Projection | 0.218 in |
| Bore Size [Max] | 1.188 in |
| Bushing Series | N/A |
| Bore Type | Rough Bore |
| Set Screw Size | 10-24 x 3/16 |
| Bore Range [Max] | 1.187 in |
| Material External Use | Steel |
| Hub Dia. | 1 1/2 in |
| Pitch Diameter | 3.056 in |
| Type | D-1 |
| Bushing Type | None |
| Outside Dia. | 3.036 in |
| Length Through Bore | 1 in |
| Material | Steel |
| Belt Pitch | 1/5 in |
| Bore Size [Min] | 0.313 in |
| Belt Width | 0.375 in |
| Weight | 0.63 LB |
| EAN or UPC | 697950117607 |
