Skip to content Skip to navigation menu
Miter Gear

HM624A

Miter Gear
Item #100811489
  • 20° Pressure Angle
  • 24 Teeth
  • 6 Diametral Pitch
  • 0.869 in Face Width
  • 4 in Pitch Diameter
  • Reborable
  • 1.5 in Minimum Bore Size
+ Show More + Show Less
Miter Gear
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 20° Pressure Angle
  • 24 Teeth
  • 6 Diametral Pitch
  • 0.869 in Face Width
  • 4 in Pitch Diameter

description

  • All standard stock miter gears must be mounted at right angles (90°) for proper tooth bearings.

features

  • All Martin Gears are cut with the 20° pressure angle system
  • Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears
  • The mounting distance must be held in order to maintain proper bachlash between gears. The use of a straight mineral oil as a lubricant is recommended for most miter gear applications
  • All Martin Miter Gears are cut with the 20° pressure angle system.
  • The use of a straight mineral oil as a lubricant is recommended for most Miter Gear applications.
Pressure Angle 20 degrees
Face Width 0.867 in
Bore Type Reborable
Hub Projection 1.313 in
No. of Teeth 24
Pitch Diameter 4 in
Outside Dia. 4.236 in
Material Internal Use Carbon Steel
Material Steel
Ratio 1:1
Hardened Teeth With Hardened Teeth
Inch/Metric Inch
O.D. 4.236 in
Bore Size [Max] 1.8145 in
Diametral Pitch 6
Bore Size 1.5 in
Length Through Bore 2.31 in
Spiral Direction Straight
Hub O.D. 3 in
Material External Use Steel
Finished Bore Size 1.5 in
Mounting Distance 3.63 in
Bore Size [Min] 1.5 in
Weight 4.04 LB
EAN or UPC 697950051529
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison