Find a Service Center
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 60 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 2.563 in |
| Teeth Face Width | 2.563 in |
| Material Internal Use | Cast Iron |
| Material External Use | Cast Iron |
| Hub Projection | 0.719 in |
| Construction Internal | Spoked |
| Type | C-3 |
| Pitch Diameter | 16.711 in |
| Belt Pitch | 7/8 in |
| Finished Bore | N/A |
| Bore Size [Min] | 1.438 in |
| Belt Width | 2 in |
| Bore Type | Bushed |
| Belt Size | XH |
| Bushing Series | 4040 |
| Length Through Bore | 4 in |
| No. of Teeth | 60 |
| Bore Range [Min] | 1.4375 in |
| Bore Range [Max] | 4 in |
| Bore Size [Max] | 4 in |
| Bushing Bore Size [Max] | 4 in |
| Bushing Bore Size [Min] | 1.438 in |
| Hub Type | C |
| Material | Cast Iron |
| Bushing Type | Taper-Lock |
| Pitch Dia. | 16.711 in |
| Outside Dia. | 16.601 in |
| Hub Dia. | 8 1/2 in |
| Weight | 75.0 LB |
| EAN or UPC | 697950084091 |
