Find a Service Center
- Single Row Radial Bearing
- 5/8" ID x 1 3/4" OD x 1/2" Wide
- Double Sealed
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Contact Angle | 0° |
| Outer Ring Width | 1/2 in |
| Precision | Standard |
| Limiting Speed - Grease | 6000 rpm |
| Lubricant | General Purpose |
| I.D. | 5/8 in |
| Rows of Balls | Single |
| Cage Type | Plastic |
| Sealed Width | 1/2 in |
| Enclosure | Double Sealed |
| Dynamic Load Rating | 2600 lbf |
| Limiting Speed | 6000 rpm |
| Preload Level | None |
| O.D. | 1.75 in |
| Bearing Type | Radial |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Radial |
| Shielded Width | 1/2 in |
| Cage Material | Nylon |
| O.D. Type | Straight |
| Material | Steel |
| Inch/Metric | Inch Bore |
| Snap Ring | No Snap Ring |
| Width | 1/2 in |
| No. in Set | Single Bearing |
| Seal Type | Contact Seals |
| Locking Device | No Locking Device |
| Inner Ring Width | 1/2 in |
| Limiting Speed - Oil | 6000 rpm |
| Seal Material | Rubber |
| Fillet Radius | 0.025 in |
| Radial Internal Clearance | Normal |
| Radial Internal Clearance Specification | Normal Clearance |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 1025 lbf |
| Weight | 0.377 LB |
