6202-10ZZC3

62 Series 15.87 mm I.D Single Row Deep Groove Type Ball Bearing

Item #101385633

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Precision	Standard
Limiting Speed - Oil	24000 rpm
Cage Type	Metal
Static Load Rating [Max]	839.00 lbf
Series	62
Seal Type	Non-Contact Seals
Radial Internal Clearance Specification	Greater Than Normal Clearance
Material	Steel
Width	11 mm
Limiting Speed - Grease	20000 rpm
Corner Radius [Min]	0.60 mm
Seal Material	Metal
Preload Level	None
Rows of Balls	Single
Bore Type	Round Bore
Lubricant	Mul-Temp SRL
Dynamic Load Rating	1,720.00 lbf
Bearing Type	Deep Groove
Contact Angle	0°
O.D.	35 mm
O.D. Type	Straight
Ball Material	Steel
Enclosure	Double Shielded
Cage Material	Pressed Steel
Inch/Metric	Metric Bore
Locking Device	No Locking Device
Outer Ring Width	11 mm
Capacity	Standard Capacity
Precision Level	Standard (ABEC 1)
I.D.	15.87 mm
Inner Ring Width	11 mm
Radial Internal Clearance	C3
No. in Set	Single Bearing
No. of Rows	Single
Snap Ring	No Snap Ring
Weight	0.099 LB
EAN or UPC	29176013904