The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Seal Material
Buna-N
Flow Controls
w/o Flow Controls
Port Size
1/4
Series
HBT
Support Rod Diameter
25 mm
Slide Orientation
Right Hand (Standard)
Stroke
8 in
Slide Type
Thrust Slide
Cylinder Type
NFPA Pneumatic Cylinder
Port Location
Standard (Position 1)
Proximity Sensor
Prox Ready, 12 mm
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Temperature Range [Max]
165 °F
Pressure [Max]
150 psi
Bearing Type
Composite Bearing w/Oversized Support Rods
Intermediate Stroke
N/A
Support Rod Material
Steel
Bumpers - Slide
No Bumpers
Cushions - Slide
No Cushions
Slide Configuration Option Code
A
Positions
2 Position
Base Wt.
9.83 lb
Temperature Range [Min]
0 °F
Port Type
NPTF
Dowel Pin Holes
w/o Dowel Pin Holes
Proximity Sensor Code
J1
Stroke Tolerance
+0.030 in / -0.000 in
Cylinder Bore Size
1.5 in
Weight per Inch
0.63 lb
Weight
0.0 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
