The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Reed, hall effect and inductive proximity sensors
Shock absorbers
Shock ready
Slides without cylinders
Bearing Type
Composite Bearing w/Contaminant Tolerant Seals
Base Wt.
8.86 lb
Slide Type
Thrust Slide
Dowel Pin Holes
w/o Dowel Pin Holes
Weight per Inch
0.48 lb
Proximity Sensor
No Proximity Sensor
Proximity Sensor Code
None
Series
HBT
Bumpers - Slide
Bumpers (Both Ends)
Support Rod Material
Stainless Steel
Temperature Range [Min]
0 °F
Stroke Tolerance
+0.030 in / -0.000 in
Slide Orientation
Right Hand (Standard)
Positions
2 Position
Support Rod Diameter
20 mm
Temperature Range [Max]
165 °F
Pressure [Max]
150 psi
Stroke
8 in
Port Size
1/4
Shock Absorbers - Slide
No Shock Absorber
Cylinder Type
NFPA Pneumatic Cylinder
Flow Controls
w/o Flow Controls
Cylinder Seal Material
Buna-N
Intermediate Stroke
N/A
Slide Configuration Option Code
B
Cushions - Slide
No Cushions
Port Location
Standard (Position 1)
Port Type
NPTF
Cylinder Bore Size
1.5 in
Weight
0.0 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
