The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Reed, hall effect and inductive proximity sensors
Shock absorbers
Shock ready
Slides without cylinders
Stroke Tolerance
+0.030 in / -0.000 in
Port Type
NPTF
Port Location
Standard (Position 1)
Base Wt.
14.35 lb
Proximity Sensor
No Proximity Sensor
Cushions - Slide
No Cushions
Support Rod Diameter
25 mm
Series
HBT
Slide Orientation
Right Hand (Standard)
Cylinder Seal Material
Buna-N
Port Size
3/8
Slide Configuration Option Code
B
Proximity Sensor Code
None
Pressure [Max]
150 psi
Bumpers - Slide
Bumpers (Both Ends)
Bearing Type
Composite Bearing
Cylinder Bore Size
2 in
Temperature Range [Max]
165 °F
Intermediate Stroke
N/A
Cylinder Type
NFPA Pneumatic Cylinder
Positions
2 Position
Dowel Pin Holes
w/o Dowel Pin Holes
Slide Type
Thrust Slide
Weight per Inch
0.64 lb
Stroke
23 in
Shock Absorbers - Slide
No Shock Absorber
Support Rod Material
Steel
Temperature Range [Min]
0 °F
Flow Controls
w/o Flow Controls
Weight
0.0 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
