The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Reed, hall effect and inductive proximity sensors
Shock absorbers
Shock ready
Slides without cylinders
Cushions - Slide
No Cushions
Series
HBT
Stroke Tolerance
+0.030 in / -0.000 in
Slide Orientation
Right Hand (Standard)
Proximity Sensor
No Proximity Sensor
Positions
2 Position
Slide Configuration Option Code
A
Support Rod Diameter
30 mm
Support Rod Material
Steel
Bumpers - Slide
No Bumpers
Cylinder Seal Material
Buna-N
Temperature Range [Max]
165 °F
Port Location
Standard (Position 1)
Dowel Pin Holes
w/o Dowel Pin Holes
Weight per Inch
0.83 lb
Stroke
24 in
Pressure [Max]
150 psi
Base Wt.
15.67 lb
Cylinder Type
NFPA Pneumatic Cylinder
Temperature Range [Min]
0 °F
Proximity Sensor Code
None
Port Size
3/8
Bearing Type
Composite Bearing w/Oversized Support Rods
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Intermediate Stroke
N/A
Cylinder Bore Size
2 in
Flow Controls
w/o Flow Controls
Slide Type
Thrust Slide
Port Type
NPTF
Weight
0.0 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
