Find a Service Center
Alternate Products
- 0.25 in Inner Diameter
- 0.625 in Outer Diameter
- Single Row
- 0.196 in Overall Width
- 2 Shields
description
- Four sizes in the cylicdrical OD series are offered in a flanged construction. Flanged bearings have integral shoulders for mounting in through-bored housings. These flanged bearings have straight OD and are interchangeable with the corresponding unflanged sizes. The flanged group is available with double shields. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
| Closure Type | 2 Shields |
| Radial Internal Clearance | C3 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Flange O.D. | 0.695 in, 18 mm |
| Rows of Balls | Single |
| Seal Material | Metal |
| No. in Set | Single Bearing |
| Material | Steel |
| Internal Clearance | C0 |
| icNumber | 7698066 |
| Width | 0.196 in |
| Bearing Type | Radial |
| Origin | Single Row Radial |
| O.D. | 0.625 in |
| Temperature Range [Min] | -30 °F |
| Snap Ring | No Snap Ring |
| Relubricatable | No |
| I.D. | 1/4 in |
| Locking Device | No Locking Device |
| Enclosure | Double Shielded |
| Static Load Rating [Max] | 125 lbf |
| Inner Ring Width | 0.196 in |
| Bearing Material | Steel |
| Rolling Element Material | Steel |
| Cage Material | Steel |
| Seal Type | Non-Contact Seals |
| Temperature Range [Max] | 275 °F |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Round Bore |
| O.D. Type | Flanged |
| Flange Width | 0.042 in |
| Precision Class | ISO P0 |
| Inch/Metric | Inch Bore |
| Overall Width | 0.196 in, 5 mm |
| Lubricant | Polyurea Base |
| Outer Ring Width | 0.196 in |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| Preload Level | None |
| Precision | Standard |
| No. of Rows | 1 |
| Rolling Element | Ball |
| Fillet Radius Cone | 0.01 in, 0.25 mm |
| Cage Type | Metal |
| Weight | 0.16 LB |
| EAN or UPC | 87796044159 |
| NSN Number | 3110-00-485-4444, 3110-00-796-7257 |
