Find a Service Center
- 1.25" Shaft, 1.5625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Overall Width | 1 21/32 in |
| Base Width | 1 9/16 in |
| Bolt Hole Spacing | 4 5/8 in |
| Length Through Bore | 1.5 in |
| Temperature Range [Max] | 250 °F |
| Base Height | 17/32 in |
| Seal Type | Contact Seals |
| Base Length | 6 3/16 in |
| Lubrication | Relubricatable |
| Series | Survivor™ PT Series |
| Shaft Dia. | 1.25 in |
| Inch/Metric | Inch Bore |
| Locking Device | Setscrew Locking Collar |
| Insert Type | Steel Insert |
| Collar O.D. | 1.587 in |
| Bolt Size | 1/2 in |
| Bearing Design | Non-Expansion |
| Housing Material | Polymer |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Max] | 5 9/16 in |
| Bearing Insert | GY1103KRRB3TDCF |
| Housing Construction | 1 Piece |
| Bolt Holes | 2 |
| Housing Height | 3 5/32 in |
| Bearing Type | Ball Bearing |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Weight | 1.13 LB |
| EAN or UPC | 87796189225 |
