Find a Service Center
Alternate Products
AMI Bearings Inc.
KHLP201-8
Narrow Inner Ring Cast Iron Housing Material Pillow Block
Item #101398993
- 0.5" Shaft, 1.0625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Series | YAK Series |
| Insert Type | Steel Insert |
| Inch/Metric | Inch Bore |
| Base Width | 1 3/16 in |
| Length Through Bore | 1.07813 in |
| Shaft Dia. | 0.5 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 3 5/8 in |
| Bolt Size | 3/8 in |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Housing Height | 2 3/32 in |
| Locking Device | Setscrew Locking Collar |
| Base Length | 4 7/8 in |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing Range [Min] | 2 3/4 in |
| Bearing Insert | GY1008KRRB |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Spacing Range [Max] | 4 1/2 in |
| Collar O.D. | 0.9 in |
| End Type | Open End |
| Housing Material | Cast Iron |
| Base Height | 11/32 in |
| Overall Width | 1 7/32 in |
| Bearing Type | Ball Bearing |
| Weight | 1.088 LB |
| EAN or UPC | 87796157439 |
