Find a Service Center
- 2.4375" Shaft, 2.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
- The patented Survivor™ PT polymer-housed units have been tested to withstand a wide range of highly corrosive chemicals commonly found in food and beverage processing industries. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F). The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Mounted Unit Duty | Normal-Duty |
| Housing Construction | 1 Piece |
| Bolt Size | 5/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Min] | 6 1/4 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing Range [Max] | 8 9/16 in |
| Length Through Bore | 2.5625 in |
| Collar O.D. | 3.011 in |
| Base Height | 7/8 in |
| Inch/Metric | Inch Bore |
| Base Width | 2 3/8 in |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Locking Device | Setscrew Locking Collar |
| Shaft Dia. | 2.4375 in |
| Bolt Hole Spacing | 7 13/32 in |
| Insert Type | Steel Insert |
| Base Length | 9 7/16 in |
| Series | YAK Series |
| Dynamic Load Rating | 13400 lbf |
| Bearing Insert | GY1207KRRB |
| Housing Material | Cast Iron |
| Overall Width | 2 3/4 in |
| Lubrication | Relubricatable |
| Housing Height | 5 13/32 in |
| End Type | Open End |
| Seal Type | Contact Seals |
| Collar No. | N/A |
| Weight | 9.786 LB |
| EAN or UPC | 87796157613 |
