Find a Service Center
Alternate Products
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Base Length | 127 mm |
| Bearing Insert | GYE20KRRB |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Collar O.D. | 27.56 mm |
| Series | YAK Series |
| Bearing Design | Non-Expansion |
| Overall Width | 34.13 mm |
| Housing Height | 62.7 mm |
| Mounted Unit Duty | Normal-Duty |
| Bolt Size | M10 |
| Inch/Metric | Metric Bore |
| End Type | Open End |
| Bolt Hole Spacing Range [Min] | 76.2000 mm |
| Bolt Holes | 2 |
| Base Width | 31.8 mm |
| Bearing Type | Ball Bearing |
| Seal Type | Contact Seals |
| Length Through Bore | 30.9 mm |
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Spacing | 96 mm |
| Shaft Dia. | 20 mm |
| Bolt Hole Spacing Range [Max] | 155.8000 mm |
| Insert Type | Steel Insert |
| Base Height | 11.9 mm |
| Weight | 1.494 LB |
| EAN or UPC | 87796169623 |
