Find a Service Center
- Gray Iron Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Minimum Bore Spur Gear
| Standards Met | AGMA |
| Pitch Diameter (in) | 5.5 |
| Hub Projection (in) | 0.875 |
| Bore Size (in) | 0.875 |
| Number of Teeth/Threads | 66 |
| Material | Gray Iron |
| Pressure Angle | 20 degrees |
| Outside Diameter (in) | 5.66 |
| Face Width (in) | 1 |
| Pitch Diameter | 5.5 in |
| Diametral Pitch | 12 |
| Bore (Min) (in) | 0.875 |
| Hub Diameter (in) | 2.625 |
| Bore Type | Minimum Plain Bore |
| No. of Teeth | 66 |
| Length Through Bore (in) | 1.875 |
| Bore (Max) (in) | 1.5625 |
| Overall Length (in) | 1.875 |
| Length Through Bore | 1.875 in |
| Weight | 5.16 LB |
| EAN or UPC | 662289236329 |
