Find a Service Center
- 1.625 Length Through Bore (in)
features
- Browning Gears are rated in accordance with AGMA standards
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Bevel and Miter Gears Develop Axial Thrust
| Pressure Angle | 20 degrees |
| Bore Type | Finished Bore |
| Hub Projection (in) | 0.9375 |
| Number of Teeth/Threads | 25 |
| Face Width (in) | 0.57 |
| Hub Diameter (in) | 2 |
| Pitch Diameter (in) | 2.5 |
| Bore Size (in) | 0.875 |
| Mounting Distance | 2.437 |
| Lead/Helix Angle | 35 |
| Bore (Min) (in) | 0.875 |
| Material | Steel |
| Spiral Gear Hand Direction | RIGHT |
| Length Through Bore (in) | 1.625 |
| Diametral Pitch | 10 |
| Bore (Max) (in) | 0.875 |
| Weight | 1.305 LB |
| EAN or UPC | 662289167234 |
