Find a Service Center
- 1 Length Through Bore (in)
description
- Spiral tooth form miter bevel gears are suited for higher speed and larger torque applications
features
- Browning Gears are rated in accordance with AGMA standards
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Bevel and Miter Gears Develop Axial Thrust
- Adequate Bearing support Must be Provided
| Length Through Bore (in) | 1 |
| Material | Steel |
| Mounting Distance | 1.5 |
| Bore Type | Finished Bore |
| Hub Projection (in) | 0.625 |
| Bore (Min) (in) | 0.625 |
| Hub Diameter (in) | 1.25 |
| Pressure Angle | 20 degrees |
| Lead/Helix Angle | 35 |
| Bore (Max) (in) | 0.625 |
| Bore Size (in) | 0.625 |
| Spiral Gear Hand Direction | RIGHT |
| Diametral Pitch | 12 |
| Face Width (in) | 0.32 |
| Number of Teeth/Threads | 18 |
| Pitch Diameter (in) | 1.5 |
| Weight | 0.3 LB |
| EAN or UPC | 662289127207 |
