Find a Service Center
- Steel Material
- Bushed Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Browning Gears are rated in accordance with AGMA standards
| Material | Steel |
| Pitch Diameter | 3.5 in |
| Standards Met | AGMA |
| Face Width (in) | 1.25 |
| Diametral Pitch | 10 |
| Overall Length (in) | 1.875 |
| Outside Diameter (in) | 3.7 |
| Hub Projection (in) | 0.4375 |
| Hub Diameter (in) | 2.5 |
| Bore Size (in) | 0.375 |
| No. of Teeth | 35 |
| Number of Teeth/Threads | 35 |
| Pitch Diameter (in) | 3.5 |
| Bore (Max) (in) | 1.5 |
| Length Through Bore | 1.875 in |
| Pressure Angle | 20 degrees |
| Bore Type | Bushed Bore |
| Length Through Bore (in) | 1.875 |
| Bore (Min) (in) | 0.375 |
| Weight | 2.68 LB |
| EAN or UPC | 662289217700 |
