Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Minimum Bore Spur Gear
- Browning Gears are rated in accordance with AGMA standards
| Diametral Pitch | 12 |
| Hub Projection (in) | 0.625 |
| Length Through Bore | 1.625 in |
| Pitch Diameter | 2 in |
| Outside Diameter (in) | 2.16 |
| Bore (Min) (in) | 0.75 |
| Pressure Angle | 20 degrees |
| Hub Diameter (in) | 1.75 |
| Overall Length (in) | 1.625 |
| Bore Size (in) | 0.75 |
| Bore (Max) (in) | 1 |
| Material | Steel |
| Number of Teeth/Threads | 24 |
| Bore Type | Minimum Plain Bore |
| Pitch Diameter (in) | 2 |
| Length Through Bore (in) | 1.625 |
| Standards Met | AGMA |
| Face Width (in) | 1 |
| No. of Teeth | 24 |
| Weight | 1.1 LB |
| EAN or UPC | 662289216284 |
