Find a Service Center
Alternate Products
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Gear Construction | Plain |
| Length Through Bore | 1.250 in |
| Bore Size | 0.875 in |
| Length Through Bore (in) | 1.25 |
| Number of Teeth/Threads | 30 |
| Bore (Max) (in) | 0.875 |
| Bore Type | Bored to Size |
| Diametral Pitch | 16 |
| Bore (Min) (in) | 0.875 |
| Face Width (in) | 0.75 |
| Hub Projection (in) | 0.5 |
| Bushing Bore Size (in) | 0.8750 |
| Hub Diameter (in) | 1.625 |
| Outside Diameter (in) | 2 |
| Pitch Diameter | 1.875 in |
| Standards Met | AGMA |
| Pressure Angle | 20 degrees |
| No. of Teeth | 30 |
| Overall Length (in) | 1.25 |
| Material | Steel |
| Pitch Diameter (in) | 1.875 |
| Bore Size (in) | 0.875 |
| Weight | 0.69 LB |
| EAN or UPC | 662289258826 |
