Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Minimum Bore Spur Gear
| Diametral Pitch | 20 |
| Pitch Diameter | 2.25 in |
| Hub Diameter (in) | 1.8125 |
| Length Through Bore | 1.000 in |
| Standards Met | AGMA |
| Hub Projection (in) | 0.5 |
| Face Width (in) | 0.5 |
| Pitch Diameter (in) | 2.25 |
| Bore Size (in) | 0.5 |
| Pressure Angle | 20 degrees |
| Material | Steel |
| Length Through Bore (in) | 1 |
| Bore (Max) (in) | 1.25 |
| Bore Type | Minimum Plain Bore |
| Outside Diameter (in) | 2.35 |
| Bore (Min) (in) | 0.5 |
| No. of Teeth | 45 |
| Overall Length (in) | 1 |
| Number of Teeth/Threads | 45 |
| Weight | 1.0 LB |
| EAN or UPC | 662289215829 |
