Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Minimum Bore Spur Gear
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
| No. of Teeth | 28 |
| Pitch Diameter | 5.6 in |
| Overall Length (in) | 3.75 |
| Bore (Min) (in) | 1.125 |
| Length Through Bore | 3.750 in |
| Bore Size (in) | 1.125 |
| Standards Met | AGMA |
| Outside Diameter (in) | 6 |
| Hub Diameter (in) | 4.25 |
| Bore (Max) (in) | 3 |
| Pressure Angle | 20 degrees |
| Hub Projection (in) | 1.25 |
| Pitch Diameter (in) | 5.6 |
| Diametral Pitch | 5 |
| Number of Teeth/Threads | 28 |
| Bore Type | Minimum Plain Bore |
| Face Width (in) | 2.5 |
| Length Through Bore (in) | 3.75 |
| Material | Steel |
| Weight | 21.36 LB |
| EAN or UPC | 662289147243 |
