Find a Service Center
Boston Gear
7726-10-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805886
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Axial rating will reduce by 50% unless an EP (Extreme Pressure) grease or oil lubrication is used.
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input Motor HP | 3 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Box Height | 8 in |
| Input (Shaft or Bore) Size | 3/4 in |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 95% |
| Output Speed | 175 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Motor Application | General Purpose |
| Worm Position | Universal |
| Family Name | Std Unit |
| Shaft Assembly Code | G |
| Frame | N/A |
| Torque Out @ 1150 rpm | 1390 in lb |
| Frame Size | Shaft Input, Not a C-Face |
| Output Bore Shaft Dia. | 1.125 in |
| Housing Material | Cast Iron |
| Material | Cast Iron, Standard Paint |
| Box Width | 4 7/16 in |
| Input Configuration | Shaft Input |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Reduction Type | Single |
| Torque Out @ 1750 rpm | 1345 in lb |
| Output Configuration | Left Output |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Use With | 726 |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Lubrication | None |
| Ratio | 10:1 |
| Standard | AGMA Service Class II |
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Box Length | 7 3/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Series | 700 |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Style | Right Angle |
| Bolt Center | 8 in x 5 1/4 in |
| Output Shaft | Solid |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Center Distance | 2.625 in |
| Output Torque | 1345 lb-in |
| Center Distance Code | 726 |
| Media Mapping Output | G |
| Input Power Rating | 3.94 hp, 2.938 kW |
| HP @ RPM | 3 hp @ 1800 rpm |
| Washdown Duty | No |
| Weight | 41.1 LB |
| EAN or UPC | 781711517383 |
