Find a Service Center
Boston Gear
F713-25-B5-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809816
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Fan Cooled | No |
| Reduction Type | Single |
| Use With | 713 |
| Box Height | 4 21/32 in |
| Center Distance | 1.33 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Housing Material | Cast Iron |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Worm Position | Universal |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance Code | 713 |
| Base Mounting Attachment | No Base |
| Output (Shaft or Bore) Size | 5/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.031 hp |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Frame | 56C |
| Motor HP | 0.3333 hp |
| Base | No |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Torque @ RPM | 260 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Torque Out @ 1150 rpm | 260 in lb |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Motor Application | General Purpose |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Box Length | 4 1/4 in |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Media Mapping Output | G |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Shaft Assembly Code | G |
| Output Torque | 307 lb-in |
| Standard | AGMA Service Class II |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Output Configuration | Left Output |
| Box Width | 4.03 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Torque Out @ 1750 rpm | 307 in lb |
| Series | 700 |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Output Speed | 70 rpm |
| Input Motor HP | 0.33 |
| Lubrication | None |
| Family Name | F |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Bore Code | B5 |
| Output Shaft Projection | Solid Left Output |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Output Bore Shaft Dia. | 0.625 in |
| Rated Efficiency | 79% |
| Output Shaft | Solid |
| Bolt Center | 3 1/4" x 2" |
| Motor Frame Size | B556C |
| Ratio | 25:1 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Weight | 13.1 LB |
| EAN or UPC | 781711518823 |
