Boston Gear
F738-15F-B9-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871698
- 7.50 Input Motor hp
- 700 Series
- 3.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Box Width | 8 3/8 in |
| Output Torque | 3543 lb-in |
| Center Distance | 3.75 in |
| HP @ RPM | 5 hp @ 1800 rpm |
| Input Motor HP | 7.50 |
| Series | 700 |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Output Bore Shaft Dia. | 1.625 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Configuration | Left Output |
| Output Speed | 116.7 rpm |
| Output Torque Rating Range [Min] | 3500 lb-in, 400 Nm |
| Input Configuration | C-Face Quilled |
| Motor HP | 5 hp |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Standard | AGMA Service Class I |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Installed Options | Fan |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Media Mapping Style | F |
| Bore Code | B9 |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Base Mounting Attachment | No Base |
| Box Height | 10 7/16 in |
| Fan Cooled | Yes |
| Box Length | 10 in |
| Worm Position | Universal |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Output Torque @ RPM | 3543 in lb @ 1750 rpm, 3600 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Frame | 180TC, 210C |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Torque Out @ 1750 rpm | 3543 in lb |
| Style | Right Angle |
| Media Mapping Output | G |
| Reduction Type | Single |
| Motor Frame Size | B9180TC210C |
| Frame Size | 180TC, 210C |
| Base to Centerline of Input Shaft | 7 5/8 in |
| Max. Thrust Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Lubrication | None |
| Motor Application | General Purpose |
| Input Power Rating | 7.47 hp, 5.57 kW |
| Max. Input HP @ 100 rpm | 0.68 hp |
| Shaft Assembly Code | G |
| Torque Out @ 1150 rpm | 3600 in lb |
| Base to Centerline of Output Shaft | 3 7/8 in |
| Rated Efficiency | 88% |
| Max. Overhung Load @ RPM | 2000 lb/in @ 1150 rpm, 2000 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Center Distance Code | 738 |
| Washdown Duty | No |
| Output Shaft Projection | Solid Left Output |
| Input HP @ RPM | 4.99 hp @ 1150 rpm, 7.47 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| Keyway Size | 1/4 x 1/8 |
| Ratio | 15:1 |
| Material | Cast Iron, Standard Paint |
| Family Name | F |
| Output Torque Rating Range [Max] | 3999 lb-in, 499 Nm |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Weight | 86.1 LB |
| EAN or UPC | 781711534892 |
