SSF2S-116

Intermediate Duty 2-Bolt Flange Unit

Item #100936375

1 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Insert Material	52100 Bearing Steel
Housing Material	Stamped Steel
Foot Height	0.17 in
Bore Size - Inch	1
Misalignment Type	Static Only
Expansion	No
Radial Static Load Capacity	1651 lb
Overall Width	2.75 in
Inner Race Heat Treat Method	Zone-Hardened
Flange Type	2-Bolt Flange
Heat Treat Method (Inner Race)	Zone-Hardened
Overall Length (in)	3.75
Centerline to Front Face (in)	0.765
Pilot Configuration	No Pilot
Radial Dynamic Load Capacity (lb)	2801
I.D.	1 in
Bore Type	Straight
Retainer Material	Molded Fiber Glass Reinforced Nylon
Internal Clearance	Standard
Shaft Dia.	1 in
Lubrication	Lithium Complex NLGI 2 Grease
Finish	Uncoated
Bearing Design	Non-Expansion
Maximum Operating Temperature	200
Housing Width (in)	0.656
Inner Ring OD (in)	1.375
Bore Shape	Straight
Inch/Metric	Inch
Radial Dynamic Load Capacity	2801 lb
Foot Height (in)	0.172
Retainer Type	Ball Riding Retainer
Radial Static Load Capacity (lb)	1651
Overall Height to Inner Ring	1.11 in
Mounted Unit Duty	Intermediate Duty
Bearing Insert Coating	Uncoated
Bolt Size	0.31 in
End Cap	No
Duty Series	Intermediate
Measure Units	Inch
Bolt Size (in)	0.3125
Housing Width	0.66 in
Overall Width (in)	2.75
Insert No.	LS-116
Seal Type	Single Lip Contact Seals
Replaceable Insert	Yes
Relubricatable	Yes
Overall Height to Inner Ring (in)	1.109
Outer Ring Land Profile	Standard
Bolt Center-to-Center Length (in)	3
Housing Construction	Two Piece
Weight	0.645 LB
EAN or UPC	662460336985