Skip to content Skip to navigation menu
Normal Duty Semi-Solid 2-Bolt Flange Unit

VF2S-235AH

Normal Duty Semi-Solid 2-Bolt Flange Unit
Item #100935600
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material
  • 2.19 in Inside Diameter
+ Show More + Show Less
Normal Duty Semi-Solid 2-Bolt Flange Unit
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal and flinger
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Pilot Configuration No Pilot
Housing Width (in) 1.5156
Foot Height (in) 0.813
Overall Width (in) 5.25
Expansion No
Length Through Bore 2.19 in
Bolt Size (in) 0.625
Insert Material 52100 Bearing Steel, Black Oxided Inner
Flange Type 2-Bolt Flange
Inner Race Heat Treat Method Zone-Hardened
Heat Treat Method (Inner Race) Zone-Hardened
Overall Height to Inner Ring (in) 2.313
Overall Height (in) 2.3125
Radial Static Load Capacity 6601 lb
Bolt Center-to-Center Length (in) 7.2500
Radial Static Load Capacity (lb) 6601
Housing Base Semi-Solid
Inner Race Length (in) 2.188
Inch/Metric Inch
Internal Clearance Standard
Bearing Insert Coating Black Oxide Coated Inner Ring
Overall Width 5.25 in
Housing Width 1.52 in
Bearing Design Non-Expansion
Retainer Material Molded Fiber Glass Reinforced Nylon
Radial Dynamic Load Capacity (lb) 9752
Platform Air Handling
Shaft Dia. 2.1875 in
Bore Size - Inch 2.188
Finish Black Oxide Coated Inner Ring
Retainer Type Ball Riding Retainer
End Cap No
Mounted Unit Duty Standard Duty
Insert No. VS-235
Misalignment Type Static Only
Maximum Operating Temperature 200
Housing Construction One Piece
RPM [Max] 2500 rpm
Overall Height to Inner Ring 2.31 in
I.D. 2.19 in
Replaceable Insert Yes
Centerline to Front Face (in) 1.313
Measure Units Inch
Radial Dynamic Load Capacity 9752 lb
Bolt Size 0.63 in
Bore Type Straight
Housing Material Cast Iron
Relubricatable Yes
Overall Length (in) 8.5
Bore Shape Straight
Outer Ring Land Profile Standard
Lubrication Lithium Complex NLGI 2 Grease
Foot Height 0.81 in
Duty Series Normal
Length Through Bore (in) 2.188
Inner Ring OD (in) 2.719
Seal Type Single Lip Contact Seal with Flinger
Weight 7.14 LB
EAN or UPC 662460066127
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison