Find a Service Center
Alternate Products
- 2.688 Bore Diameter
- 6 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Bore Type | Rough |
| Model | Series H |
| O.D. | 6 in |
| Speed [Max] | 12000 rpm |
| Bore Dia. [Max] | 2 11/16 in |
| Inch/Metric | Inch |
| Bore with Standard Key For Rigid Hub [Max] | 2.6880000000000002 |
| Hub Dia. | 3.183 in |
| Coupling Type | Gear |
| Material | Carbon Steel |
| Bolt Type | Exposed |
| Configuration | Gear |
| Flange Type | Exposed Bolt |
| Sleeve O.D. | 6 in |
| Coupling Size | 1.5 |
| Lubricated | Yes |
| Tooth Profile | Crowned |
| Bore Size [Max] | 2.6880000000000002 |
| Torque Rating | 17000 in-lb |
| Length Through Bore | 1.844 in, 46.831 mm |
| Component Type | Rigid Hub |
| Size Code | 1.5 |
| Weight | 9.54 LB |
| EAN or UPC | 662384110067 |
