Find a Service Center
Alternate Products
- 5.5 Bore Diameter
- 11 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Size Code | 3.5 |
| Material | Carbon Steel |
| Bore Type | Rough |
| Tooth Profile | Crowned |
| Model | Series H |
| Length Through Bore | 4.031 in, 102.39 mm |
| Bore with Standard Key For Rigid Hub [Max] | 5.5 |
| Bore Size [Max] | 5.5 |
| Flange Type | Exposed Bolt |
| Torque Rating | 148000 in-lb |
| Coupling Type | Gear |
| O.D. | 11 in |
| Coupling Size | 3.5 |
| Lubricated | Yes |
| Inch/Metric | Inch |
| Speed [Max] | 6000 rpm |
| Sleeve O.D. | 11 in |
| Hub Dia. | 7.75 in |
| Component Type | Rigid Hub |
| Configuration | Flex-Rigid |
| Bolt Type | Exposed |
| Bore Dia. [Max] | 5 1/2 in |
| Weight | 63.78 LB |
| EAN or UPC | 662384110104 |
