Find a Service Center
- 6.375 Bore Diameter
- 12.5 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Hub Dia. | 9 in |
| Bore Type | Rough |
| Lubricated | Yes |
| Bore Dia. [Max] | 6 3/8 in |
| Torque Rating | 236000 in-lb |
| Sleeve O.D. | 12.5 in |
| Configuration | Gear |
| Coupling Type | Gear |
| Tooth Profile | Crowned |
| Size Code | 4 |
| Model | Series H |
| Length Through Bore | 4.438 in, 112.71 mm |
| Flange Type | Exposed Bolt |
| Speed [Max] | 5260 rpm |
| Bore with Standard Key For Rigid Hub [Max] | 6.375 |
| O.D. | 12.5 in |
| Coupling Size | 4 |
| Bolt Type | Exposed |
| Inch/Metric | Inch |
| Component Type | Rigid Hub |
| Bore Size [Max] | 6.375 |
| Material | Carbon Steel |
| Weight | 92.32 LB |
| EAN or UPC | 662384110111 |
