When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
Large bore capacity with o-ring seal design. The most economical gear coupling design.
Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
Bore Size [Max]
8.5
Material
Carbon Steel
Bore Type
Rough
Tooth Profile
Crowned
Bore Dia. [Max]
8 1/2 in
Hub Dia.
11.375 in
Size Code
5
Configuration
Flex-Rigid
Inch/Metric
Inch
Flange Type
Shrouded Bolt
Speed [Max]
4300 rpm
Bore with Standard Key For Rigid Hub [Max]
8.5
Component Type
Rigid Hub
Bolt Type
Shrouded
Model
Series H
Coupling Size
5
O.D.
15.313 in
Sleeve O.D.
15.313 in
Length Through Bore
5.688 in, 144.463 mm
Torque Rating
441000 in-lb
Coupling Type
Gear
Lubricated
Yes
Weight
181.7 LB
EAN or UPC
662384110258
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
