SRFI52 60 18TC

Invader Worm Gear Reducer

Item #103979034

3.59 HP

5935 Output Torque

Single Reduction

+ Show More

Auto Replenish

each One-time purchase

Product Details

Rugged cast iron single-piece construction
Integral worm and shaft are carburized and hardened to 58 RC for extra strength
Heavy-duty tapered roller bearing on output shaft
Double-lip seals keep contaminates out and lubrication in
Provision for an extra seal permits additional protection in highly contaminated applications
Large oil reservoir ensures positive lubrication and heat dissipation
Universal pipe plug size permits mounting in any position by changing vent, drain and oil level plugs

Specifications

Base to Centerline of Output Shaft	5 5/16 in
Motor Application	General Purpose
Center Distance	5.15625 in
Base to Shaft Center Height w/Std. Base Kit	6.44 in
Output Configuration	Hollow Output
Worm Position	Top
Max. Overhung Load @ RPM	2531 lbf @ 1750 rpm
Thermal Input Horsepower @ 1750 RPM	2.91 hp
Bolt Centers w/ Std. Base Kit (in)	7 x 8 3/8
Thermal Input Horsepower @ RPM	2.65 hp @ 1150 rpm, 2.91 hp @ 1750 rpm
Torque Out @ 1750 rpm	5935 in lb
Output RPM @ 1750 rpm Input	29.2 rpm
Thermal Output Torque @ RPM	4807 in lb @ 1750 rpm, 6300 in lb @ 1150 rpm
Box Length	12 1/2 in
Output Torque @ RPM	5935 in lb @ 1750 rpm, 7590 in lb @ 1150 rpm
Box Height	13 3/4 in
Ratio	60:1
Input (Shaft or Bore) Size	1 1/4 in
Output (Shaft or Bore) Size	2 in
Max. Thrust Load @ 1150 rpm	N/A
Bolt Center Length x Bolt Center Width	11 in x 5 13/16 in
Input HP @ RPM	3.19 hp @ 1150 rpm, 3.59 hp @ 1750 rpm
Box Width	7 3/8 in
Torque Out @ 1150 rpm	7590 in lb
Washdown Duty	No
Output RPM @ Input RPM	29 rpm @ 1750 rpm
Frame Size	180TC
Reduction Type	Single Reduction
Max. Overhung Load @ 1750 rpm	2531 lbf
HP @ RPM	2 hp @ 1200 rpm, 2 hp @ 1800 rpm
Max. Input HP @ 100 rpm	0.5 hp
Frame	180TC
Base to Centerline of Input Shaft	10 15/32 in
Input Configuration	C-Face Coupled
Weight	240.0 LB