KEP2307

Solid Pillow Block

Item #101488980

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Vibration Frequency Fundamental Train	0.0073 cps
Temperature Range [Max]	200 °F, 225 °F
Radial Dynamic Load Capacity	84330 lb
Vibration Frequency Roller Spin	0.0628 cps
Inch/Metric	Inch
Size Code	10
Shaft Locking	Single Set Collar
Center Line to Base Dimension [Min]	3 3/4 in
Retainer Type	Engineered Polymer
RPM [Max]	1700 rpm
Base Width	3 1/2 in
Vibration Frequency Inner Ring Defect	0.1784 cps
Lubrication	Exxon Ronex MP
Primary Seal	Buna Sgl Lip Light Contact
Vibration Frequency Outer Ring Defect	0.1383 cps
Collar Extension	15/16 in
Lubrication Type	Exxon Ronex MP Std
Length Through Bore	4.375 in
Temperature Range [Min]	-20 °F
Housing Construction	1 Piece
Bolt Size	7/8 in
Locking Device	Single Setscrew Locking Collar
Bolt Hole Spacing	10 5/16 in
Bolt Hole Spacing Range [Max]	11 5/16 in
Base Length	13 13/16 in
Series	2000
Pillow Block Type	Thru-Bolt
Flange Type	2-Bolt Flange
Shaft Dia.	3.4375 in
Base Height	2 1/4 in
Bearing Design	Fixed
Bearing Type	Spherical Roller
Housing Material	Cast Iron
Seal Type	Light Contact Seals
Grease Fitting Size	1/8 NPT
End Type	Open End
Bolt Holes	2
Bolt Hole Spacing Range [Min]	9 5/16 in
Mounted Unit Duty	Normal-Duty
Housing Height	7 1/2 in
Insert Type	Steel Insert
Static Load Rating	90700 lb
Handle / Housing Material	Cast Iron
Weight	42.5 LB
EAN or UPC	698210684884