CFML4

CFM Series Two-Piece Commercial Male Rod End

Item #101182696

Auto Replenish

each One-time purchase

Product Details

CFM male commercial rod ends use a combined higher strength two-piece design for heavier static loads. The two-piece design provides greater housing cross section and increased load capacity than three-piece rod ends with like housing materials. This commercial series provides a lower-cost alternative for applications requiring a higher static load capacity.

Catalog load ratings are not applicable when grease fittings are specified because of the reduced cross section of the head

Specifications

Threads per Inch	28
Thread Direction	Left Hand
Misalignment Range	±8°
Bore Size	0.25 in
Thread Length	0.969 in
Type	Male Rod End
Ball Flat Dia.	0.331 in
Length Through Bore	0.375 in
Liner	N/A
Lubrication Type	Grease
Lubrication	Non-Relubricatable
Bearing Type	Rod End
Construction	Two-Piece Rod End
Housing Material	Carbon Steel, Protective Coated for Corrosion Resistance
Insert Material	N/A
Housing Width	0.281 in
Thread Size	1/4-28
Lube Fitting	w/o Lube Fitting
Ball Dia.	0.5 in
Ball Width	0.375 in
Ambient Temperature Range [Max]	350 °F
Axial Load	200 lb
Static Load Rating [Max]	2000 lbf
Head Diameter	3/4 in
Grade	Commercial
Angle of Misalignment	±8°
Ball Material	Alloy Steel-Heat Treated-Chrome Plated
Right / Left Hand	Left Hand
Length to Center of Ball	1.562 in
Static Radial Load [Max]	2000 lbf
Thread Pitch	N/A
Configuration	Male
Head Dia.	0.75 in
Thread Type	UNF
Outer Material	Carbon Steel-Corrosion Resistant Plating
Housing Style	Male Rod End
Weight	0.05 LB
EAN or UPC	662288725503