Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.250 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Thickness | 0.025 in |
| Outside Dia. | 0.527 in |
| Clearance Installed in Groove | 0.54 in |
| Inch/Metric | Inch |
| Type | Radially Assembled |
| RPM Limit | 25000 rpm |
| Length of Stack | 6.25 in |
| Load Capacity [Max] | 255 lbs |
| Package Type | Loose |
| Series | E |
| Limiting Speed | 25000 rpm |
| Shaft Dia. | 0.250 in |
| Groove Depth | 0.02 in |
| Plating | Phosphate |
| Finish | Phosphate |
| Material | Carbon Steel |
| Weight | 0.019 LB |
| EAN or UPC | 721717003398 |
