Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.438 in Shaft Size
- 0.035 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Shaft Dia. | 0.438 in |
| Inch/Metric | Inch |
| Limiting Speed | 16500 rpm |
| Material | Carbon Steel |
| Clearance Installed in Groove | 0.71 in |
| Finish | Phosphate |
| Load Capacity [Max] | 830 lbs |
| RPM Limit | 16500 rpm |
| Type | Radially Assembled |
| Groove Depth | 0.047 in |
| Package Type | Loose |
| Series | E |
| Thickness | 0.035 in |
| Length of Stack | 8.75 in |
| Outside Dia. | 0.687 in |
| Plating | Phosphate |
| Weight | 0.03 LB |
| EAN or UPC | 721717000694 |
