Find a Service Center
- 1.25 in Shaft Diameter
- 1.874 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 1.25 in |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Construction | CRW1 |
| Pressure | 10 psi |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Width | 0.25 in |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Family Name | Single Lip With Spring Shaft Seal |
| Housing Bore Dia. | 1.874 in |
| Seal Design | SKF Wave |
| Solid | Yes |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Design | CRW1 |
| Weight | 0.018 LB |
| EAN or UPC | 85311011082 |
