Find a Service Center
- 1.75 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 1.75 in |
| Spring Type | Garter |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Seal Width | 0.313 in |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Surface Speed [Nom] | 2,063 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Case Material | Steel |
| Overall Width | 0.313 in |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Housing Bore Dia. | 2.374 in |
| Design | CRW1 |
| Pressure | 10 psi |
| Weight | 0.088 LB |
| EAN or UPC | 85311018296 |
