Find a Service Center
Alternate Products
- 0.625 in Shaft Diameter
- 0.999 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Spring Type | Garter |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Overall Width | 0.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Width | 0.25 in |
| Housing Bore Dia. | 0.999 in |
| Bore Sealant | Bore Tite |
| Design | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Case Design | Metal Case |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Case Material | Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 737 ft/min |
| Solid | Yes |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 0.625 in |
| Weight | 0.062 LB |
| EAN or UPC | 85311004251 |
