Skip to content Skip to navigation menu
Cylindrical Bore Deep Groove Ball Bearing

210MG

Cylindrical Bore Deep Groove Ball Bearing
Item #102145274
  • Deep Groove Bearing
  • 1.97 in Inner Diameter
  • 3.54 in Outer Diameter
  • 0.79 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 0.79 in Outer Ring Width
  • Metric
+ Show More + Show Less
Cylindrical Bore Deep Groove Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Deep Groove Bearing
  • 1.97 in Inner Diameter
  • 3.54 in Outer Diameter
  • 0.79 in Width
  • Bearing Steel Material

applications

  • Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant

features

  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
  • Single-row maximum capacity filling-notch bearings

caution

  • Aluminum housings can be used for pressures up to 3,000 psi
  • Steel housings must be used for operating pressures above 3,000 psi
Contact Angle 0°
Material Bearing Steel
Static Load Rating [Max] 7760 lbf
Limiting Speed - Oil 7000 rpm
Origin Single Row Radial
Width 0.79 in, 20 mm
Seal Material None
Precision Standard
Radial Internal Clearance Specification Normal Clearance
Inner Ring Width 0.79 in, 20 mm
O.D. Type Cylindrical
Fillet Radius 1 mm
Series 62
Dynamic Load Rating 8790 lbf
Radial Internal Clearance Normal
Locating Snap Ring Fitted
Locking Device No Locking Device
Bore Type Cylindrical
No. in Set Single Bearing
Lubricant Oil Preservative
Cage Type Metal
Temperature Range [Max] 450 °F
O.D. 3.54 in, 90 mm
Rows of Balls Single
Bearing Type Deep Groove
Ball Material Steel
Enclosure Open
Precision Level Standard (ABEC 1)
Internal Clearance CN
Row Type 1
I.D. 1.97 in, 50 mm
Snap Ring With Snap Ring
Precision Rating ABEC 1
Outer Ring Width 0.79 in, 20 mm
Limiting Speed - Grease 5700 rpm
Cage Material Bearing Steel
Inch/Metric Metric
Rolling Element Ball
Preload Level None
Element Material Bearing Steel
Pre Lubricant None
icNumber 7704758
Seal Type Unsealed
Capacity Maximum Capacity
Weight 1.153 LB
EAN or UPC 97741004527
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison