MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Seal Material
None
Bearing Class
Class 6 / P6
Static Load Rating [Max]
4180 lbf
Material
Bearing Steel
Fillet Radius
1 mm
Flush Ground
Yes
Inch/Metric
Metric
Outer Ring Width
0.75 in, 19 mm
Contact Angle
40 Degree
O.D. Type
Cylindrical
Row Type
1
No. in Set
Single Bearing
Inner Ring Width
0.75 in, 19 mm
Bore Type
Cylindrical
Width
0.75 in, 19 mm
Rows of Balls
Single
Cage Type
Metal
Cage
Sheet Metal
Limiting Speed - Grease
9200 rpm
Ball Material
Steel
Dynamic Load Rating
34.5 kN
Radial Internal Clearance
Normal
icNumber
7695819
I.D.
1.18 in, 30 mm
Snap Ring
No Snap Ring
Lubricant
Oil Preservative
O.D.
2.83 in, 72 mm
Rolling Element
Ball
Bearing Type
Unmounted, Angular Contact
No. of Bearings
1
Duplex Type
Single
No. of Rows
Single
Capacity
Standard Capacity
Radial Internal Clearance Specification
Normal Clearance
Precision Rating
ABEC 3
Ring Type
Solid Inner Ring and Solid Outer Ring
Static Load Rating
21.2 kN
Series
7300PJ
Limiting Speed - Oil
12000 rpm
Element Material
Bearing Steel
Locking Device
No Locking Device
Internal Design
Universal Mounting
Enclosure
Open
Temperature Range [Max]
450 °F
Preload Level
Light
Origin
Single Row Angular Contact
Cage Material
Brass
Precision Level
Standard (ABEC 1)
Seal Type
Unsealed
Precision
Standard
Weight
0.807 LB
EAN or UPC
97741017381
We're here for you
with Service Centers across the country - We have your back