Find a Service Center
- Radial Shaft Seal
- 10 mm Shaft Diameter
- 18 mm Housing Bore Diameter
- 6 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Min] | -22 °F |
| Seal Application | General Purpose |
| Temperature Range [Max] | 230 °F |
| Case Construction | Rubber Covered Steel Case |
| Pressure | 10 psi |
| Shaft Dia. | 10 mm |
| Housing Bore Dia. | 18 mm |
| Lip Style | Internal |
| Lip Material | Nitrile |
| Construction | HMS48 |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Metric |
| Seal Design | Molded Design |
| Lip Type | Single Lip w/Spring |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Weight | 0.015 LB |
| EAN or UPC | 7316579045247 |
