Find a Service Center
Alternate Products
- 1.13 in Shaft Diameter
- 1.78 in Housing Bore Diameter
- 0.41 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Housing Bore Dia. | 1.78 in, 45.24 mm |
| Lip Type | Dual Lip |
| Installation | Housing Press Fit |
| Case Design | Rubber Outside Diameter |
| Shaft Dia. | 1.13 in, 28.58 mm |
| Pressure | 7 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Inch/Metric | Metric |
| Speed | 0.05 ft/min |
| Operating Temperature [Min] | -40 °F |
| Design | HMSA7 |
| Overall Width | 0.41 in, 10.31 mm |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.111 LB |
| EAN or UPC | 85311009652 |
