Find a Service Center
- 1.299 in Shaft Diameter
- 1.969 in Housing Bore Diameter
- 0.472 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Type | Dual Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Rubber Outside Diameter |
| Design | HMSA7 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | HMSA7 |
| Case Construction | Rubber Covered Steel Case |
| Inch/Metric | Metric |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Overall Width | 12 mm |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 7 psi |
| Operating Temperature [Max] | 210 °F |
| Seal Design | Standard |
| Installation | Housing Press Fit |
| Shaft Dia. | 33 mm |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Seal Type | Grease |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Seal Application | Light Dirt Exclusion |
| Speed | 0.05 ft/min |
| Housing Bore Dia. | 50 mm |
| Weight | 0.08 LB |
| EAN or UPC | 85311011921 |
